Washer and Dryer Maintenance Proper Tips

We’ve all got to do laundry. Know how to look after your washer and Dryer and how to keep it working correctly. See the maintenance tips for all this detail.

Such obedient servants stand at Victoria Appliance Washer & Dryer Repair, like our washing machine and Dryer, and stoically wait for their next usage. They are sturdy, easy to use, and just moderately expensive. They will provide you an excellent service yearly if adequately maintained. It only takes a few simple steps to lengthen the service life of your gadgets and to reduce the cost of washing and drying.

7 Automatic Washer Maintenance Tips


Washers are available in two basic models: front loaders and top loaders. Initially more costly, front loaders tend to pay for themselves, as they use about two thirds less water than the less expensive top loaders. Whatever you make the following maintenance tips for your automatic washer & Dryer will help to prolong your life or you can hire Victoria Appliance Washer & Dryer Repair professional staff.

1. Empty Wet Clothes Washer As Soon As Possible

One of the easiest — and most essential — washer maintenance steps to take. In the washer, wet clothes produce unpleasant odors and can cause mold and mildew to build up if they’re sitting too long.

2. Inspect the door

The other simple tip is to test the front loader door gaskets for moisture. When wetness is present, it may allow mold and mildew to accumulate, which may prevent the door from being properly sealed during the wash cycle. After each usage, wipe the gaskets dry and leave the door open slightly, allowing the air to circulate and the existing moisture to dry. While you’re at it, clean the gaskets and the drum with a solution of equal parts of water and use vinegar every month. And for the top loader, after each wash, leave the door open to facilitate air circulation and avoid mildew. Victoria Appliance Washer & Dryer Repair professional staff is providing an outstanding service to look after your home appliances.

ALSO READ  Benefits of the Steam Cleaner

3. Don’t Overload the Washer

Oversized loads can lead to poor wash performance, ruined clothes, and washer damage as a result of the machine being out of control. For most fabrics, the unit should be loosely packed rather than tightly packed.

4. Perform periodic maintenance washes

Two to three times a year, run a washer without any clothes on the floor. Drive the hottest cycle with a reasonable amount of detergent. Such regular maintenance washes should keep the machine clean and drain pipes clear from the build-up of dirt, grease and hard-water salts.

5. Keeping the Machine Level

To make sure the washing machine in level so that the drum is balanced when it spins. Spinning out of alignment places a strain on the parts and can significantly reduce the efficiency of your washer. Some washers use adjustable legs and lock nuts for leveling. (Note: Turn the legs clockwise to lower them and counter-clockwise to lift them.) Change and adjust the legs to stabilize the machine. Many machines also have back legs that are balanced automatically. Once the front legs have adjusted, tilt the washing machine forward so that the back braces can restore.

6. Inspect the Hoses

Unguarded, a burst of water hose will spill hundreds of gallons an hour into your house. Inspect the hoses many times a year to avoid this calamity. If you see cracks or breaks, unplug the unit, shut off the water supply on both tubes and replace them, ideally with braided, metal hoses that cannot be split open. Often, use a brush to clean the debris and sediment filters that reduce the water flow of the system. At the beginning of the day, remove your hoses every five years and mark the date on them, so you know when you last changed them. Victoria Appliance Washer & Dryer Repair offer services to take care of your appliances on your behalf.

ALSO READ  How To Choose The Right Sofa Size For Your Living Room?

7. Don’t Miss Exteriors

To avoid rusting, fill cracks and bandages with touch-up paint from your local hardware store or home supply store. Use a gentle soap to wash exterior surfaces as well as buttons and control dials to prevent sticking and malfunctioning. Well, that goes for your Dryer too.

Dryer Maintenance Tips


By all means, do not overlook the excellent Dryer standing by the washer. It’s a little less complicated than your appliance, but it also requires preventive maintenance to run smoothly.

1 Clean the Lint Trap

Lint can be harmful to both, for you and your Dryer. A dryer can erupt in flames if the lint builds up in either the lint screen or the ducts. According to the National Fire Protection Association, an estimated 16,800 fires were sparked in the United States by dryers or washing machines. It resulted in civilian deaths, damages, and millions of dollars in direct property damage. After each load, remove and clean the lint screen and use a long brush or hand vacuum to remove any lint from the bottom of the trap. Shine a spotlight in the trap to make sure it’s clear. It is helpful as a owner to have a security plan in place in the event of a fire in your home.

2 Clean the Dryer’s Venting Duct

At least once a year, clean the entire venting system of your Dryer from outside. If the duct is plastic or ribbed metal, discard it and replace it with smooth metal. Then make sure that the outside vent is free of obstructions. If this job seems to be a little beyond your DIY skills, hire a professional.

3. Don’t put soiled things in the Dryer

To keep inside of the Dryer clean and the machine working smoothly, don’t put something soiled in the Dryer. If you want to put on clothes or towels that are muddy for some other reason — a day at the pool or beach, maybe — run them through your washer first.

ALSO READ  5 Ways to Get Rid of Your Electricity Woes

4. Don’t pressure the Dryer

It’s good advice for your Dryer as well as for your washing machine. You may think that you can pack your Dryer with more than one load and save time, but the opposite is exact. Dresses need the circulation of hot air to dry, so crowding prevents this circulation and increases the drying time. Plus, overloading the Dryer will cause it to collapse.

5. Using Liquid Fabric Softener

Although the dryer sheets are cheap, they leave stains in the Dryer that can clog the vents and reduce the dryer output. Liquid fabric softener, used during the laundry process, is best suited for your Dryer.

6. Don’t forget to adjust the Dryer

Like your washer, the Dryer needs to balance for maximum performance and durability. To even out the rig, using adjustable leveling legs. If you don’t have such a dryer, using uniform-sized pieces of wood to level it. Maintenance of the simple washer and Dryer is not all that difficult. No matter your level of appliance care experience, you can save yourself some hassle and money by following these basic laundry and dryer steps. Be helpful to them, and they’re going to be useful to you for years to come.

Taking Your Washer and Dryer Maintenance, Even More, You rely on your laundry equipment to keep your life moving smoothly. The Victoria Appliance Washer & Dryer Repair warranty and Dryer Home Warranty will help you to ensure that your laundry machines are running smoothly.

Posts created 1466

Related Posts

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top